Chicago Electric 66910 Instructions d'exploitation télécharger pdf (Page 10)

Page 10 For technical questions, please call 1-800-444-3353. SKU 66910

Product Features

POWER

SWITCH

(42)

CIRCUIT

BREAKER

(39)

FEED

STICK

(76)

FIGURE D

HOPPER

(1)

POWER

CORD

(37)

TIE-DOWN

KNOBS

(11)

CHUTE

(67)

FIGURE E

MAIN

HOUSING

(14)

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION section at

the beginning of this manual

including all text under

subheadings therein before set up

or use of this product.

1.

safety glasses under an ANSI-approved

full face shield. Also wear heavy duty

work gloves and NIOSH-approved dust

mask/respirator.

If an extension cord is used, ensure that 2.

it is an outdoor type extension cord and

that it is the correct design to accept this

appliance’s plug.

WARNING! TO PREVENT

ELECTRIC SHOCK AND

SERIOUS PERSONAL

INJURY: The extension cord

must remain secured to the Chipper

Shredder’s plug. Secure the extension

cord by either using the knot method

explained in the safety warning section,

or by using a device designed



cord (sold separately).

3.

level, dry ground surface. Position the

machine so that the Chute (67) is pointed

in a safe direction, at least 25 feet from

any people, animals, or objects. Then,

chock both Wheels (29) of the machine

with scrap branches or rocks to keep the

unit from rolling. (See Figure E.)

Check to make sure the two Knobs (11) 4.

 The vibration of

the unit during normal use will cause

the Knobs to loosen and allow the Main

Housing (14) to lift up off the Safety

Shut-Off Switch (55), turning off the

Motor (47) for safety. Tightening the



Off Switch and allow the unit to start and

run. While the machine is running,

periodically check the tension of Tie-

Down Knobs. (See Figure E.)

Insert the yellow Safety Lock-Off Switch 5.

into the Power Switch (42). Then turn

the Power Switch to its “ON” position.

(See Figure D.)

6.

speed.

7.

than 1-1/4” in diameter. Never attempt

to cut limbs over 1-1/4” in diameter.

Doing so can cause equipment damage

and/or serious personal injury.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire