Chicago Electric 66891 Manuel d'utilisateur télécharger pdf (Page 12)

SKU 66891 For technical questions, please call 1-800-444-3353. Page 12

the power cord to possible damage.

The power cord must reach the work

area with enough extra length to al-

low free movement while working.

There must not be objects, such as 3.

utility lines, nearby that will present a

hazard while working.

General Operating Instructions

Make sure the Drive Belt Cover (1) is 1.

in place before turning on the Switch

(68) to the Compact Belt Sander.

To reduce the risk of personal injury, 2.

make sure the Compact Belt Sander

is not resting on the workpiece when

the Switch (68) is turned “ON”.

While this Compact Belt Sander may 3.

be held while in use with one hand,

it is preferred (and recommended)

that two hands are used for better

control and safety. One hand should

be placed on the rear section of the

rubber portion of the Body Housing

(49) and the other hand should hold

the front section.

Secure loose work pieces using a 4.

vise or clamps (not included) to pre-

vent movement while working.

When sanding wood workpieces, 5.

move the Compact Belt Sander as

much as possible in the direction

of the wood grain. This will help to

prevent scratches across the grain.

When not in use, always rest the tool

on its side.

To prevent accidents, turn off the 6.

Compact Belt Sander and disconnect

its power supply after use. Clean,

then store the tool indoors out of the

reach of children.

MAINTENANCE AND

SERVICING

Procedures not specically

explained in this manual

must be performed only by a

qualied technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch of the

Compact Belt Sander to its

“OFF” position and unplug

the tool from its electrical

outlet before performing any

inspection, maintenance, or

cleaning procedures.

TO PREVENT SERIOUS

INJURY FROM TOOL

FAILURE:

Do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

Cleaning, Maintenance, and

Lubrication

BEFORE EACH USE,1. inspect the

general condition of the Compact Belt

Sander. Check for loose hardware,

misalignment or binding of moving

parts, cracked or broken parts, dam-

aged electrical wiring, and any other

condition that may affect its safe

operation.

AFTER USE,2. wipe external surfaces

of the tool with clean cloth. Use a

shop vacuum and/or pressurized air

to remove as much dust and debris

from around the Wheels and sanding

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire